Sidi Crossfire SRS 2 Boots
The newest evolution of SIDI's premium off-road boot is the Crossfire 2 featuring more adjustability to accommodate wider calves and redesigned buckles that are easier to operate with a gloved hand. The Sole Replacement System (SRS) is a bolt-on sole design that enables a rider to swap worn soles themselves and configure the boot for different applications such as supermoto or enduro.
Dual Flex System:
- The hinged, dual position, stitch-free upper is constructed from injection-molded plastic. With the exclusive Dual Flex system and the four floating independent straps the Crossfire can provide each rider with a personal fit no matter of body shape or use with knee braces or not.
Adjustable Calf System:
- Sidi's exclusive, patented, adjustable calf system allows the rider to adjust the diameter of the Crossfire boot at the calf. This system, along with longer upper straps, allows the Crossfire boot to accommodate riders with larger calves much easier than the previous Crossfire. The Crossfire can accommodate riders with up to a 22-inch calf diameter 14 inches above from the bottom of their heel. The inner plastic plate is made of two different materials; a rigid one to support the boot and a heat resistant one to protect the rider's leg from exhaust heat. All components of this system are fully replaceable and are available in a wide variety of colors for the option of customizing the boot to your taste.
- Three extended ribs are featured at the back of the boot to assist the rider in making upshifts with his heel when starting a race. Rigid, shock resistant, anatomically shaped heel for maximum protection.
- Sidi boots do not incorporate inner booties into their design, and for good reason. Booties make the design larger and cumbersome, add to the boot's thickness, which interferes with shifting, plus the inner booties retain body heat affecting the rider's performance and comfort.
- The cam-lock buckle system incorporates a strap memory retention system.
- Adjust the straps once and they will be at the same position for every ride after that! No more readjusting for every ride or mid-day during a ride.
- The tip of the toe on the Crossfire and Charger boots are covered with plastic to protect the base material and seams against abrasion from brush etc. Plastic shift and brake lever guards on the top of each foot area.
- Lined with air Teflon mesh and Cambrelle
- Upper in leather and Microfibre material
- Replaceable shin plate
- Micro and replaceable Adjustable buckles
- Dual Flex System
- Adjustable Calf System
- Replaceable Metatarsus Inserts
- Thermoplastic defender on the toe area
- Anatomically shaped heel
- Assembled and replaceable boot leg, it is stitch-free
- Nylon Inner sole with removable arch support
- SR Rubber sole
Note: Due to a rolling change the 2 under Crossfire logo on the upper gaiter may or may not be present.
Sidi Footwear Sizing
* Sizing information is provided by the manufacturer and does not guarantee a perfect fit.
|EURO SIZE||US MEN SIZE (IN)||US WOMEN SIZE (IN)|
How to measure
A. Place both feet on a sheet of paper. Draw a vertical line to mark the tip and heel end of your foot.
B. Measure the lengths of both feet.
C. Compare the length of the bigger foot with the size table to find your perfect shoe size.
The most important helmet fitting aspect to consider before determining helmet size is helmet shape. The shape of the rider's head plays a crucial role in selecting a proper fitting motorcycle helmet. All helmet manufacturers design their lids to fit a specific head shape. These often range across three primary designations - long oval, intermediate oval, and round oval.
- Long Oval - Shaped for a head which is longer front-to-back (from forehead to the back of the skull) than it is side-to-side (ear to ear).
- Intermediate Oval - Shaped for a head which is slightly longer front-to-back than it is side-to-side. Most motorcycle helmets will fall into this category as it is the most common head shape; if a helmet does not state its shape, this is usually it.
- Round Oval - Shaped for a head which has almost identical front-to-back and side-to-side measurements.
Once the head shape is determined, it is easier to filter the enormous selection of available motorcycle helmets down to a smaller, more appropriate list of those which will fit the rider's head. Now it is time to find the correct size of the motorcycle helmet.
Helmet Safety Standards
DOT Helmet Standard: This stands for “Department of Transportation,” (not “doin’ our thang”) but the standard is FMVSS 218, the Federal Motor Vehicle Safety Standard #218, Motorcycle Helmets, and it is applicable to helmets sold in the U.S. for on-road use.
ECE 22.05 Helmet Standard: ECE stands for “Economic Commission for Europe,” which was created under a United Nations agreement in 1958. The 22.05 part refers to the specific regulation that the standards for testing are described in.
Snell (Snell Memorial Foundation M2010) Helmet Standard: The Snell Memorial Foundation is a private, non-profit organization formed in 1957 dedicated to improving helmet safety. Snell goes beyond the governmental standard-setting approach and is available to assist manufacturers with helmet development by offering prototype testing.
What is MIPS technology? MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. MIPS has been developed by leading brain surgeons and scientists to reduce the rotational forces on the brain caused by angled impacts to the head.