Alpinestars RADAR Motocross Gloves Black Teal

  • Sale
  • Regular price $30.00
  • 1 available

See size chart
Need help with sizing?


PRODUCT DETAILS

ALPINESTARS 2019 RADAR MOTOCROSS GLOVES

The Alpinestars Radar Gloves have been the staple range of Alps MX Gloves for the past few years, and given their performance and durabality, it's no wonder these guys have been so solid through that time. Sticking strong through the 2019 season, the Radar Gloves are back again with seven all new colourways, so there's plenty on offer when it comes to choosing which kind of style you want to run with!

FEATURES

  • Strap closure
  • Synthetic suede palm
  • Rolling palm on backhand and index
  • Localized perforation on palm for better breathability
  • Sublimated graphics on backhand
  • Short cuff
  • Thumb patch reinforcement for durability
  • Puller to help entrance into the glove
  • Stretch fourchettes

Alpinestars Size Chart

* Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

Jersey Pants
SIZE A CHEST (IN) B WAIST (IN) F ARM (IN) U.S PANT SIZE C HIP (IN) D THIGH (IN) E INSEAM (IN)
M 35 3/8 - 37 29 7/8 - 31 1/2 21 5/8 - 22 32 37 3/8 - 39 22 - 22  1/2 31 1/28- 31 1/2
L 36-39 32 1/2 - 34  22 1/2 - 22 7/8 34 39 - 40 1/2 22 7/8 - 23 1/4 31 7/8 - 32 1/4
XL 40 1/8 - 41 3/4 34 5/8 - 36 1/4 23 1/4 - 23 5/8 36 40 1/2 - 42 1/8 23 5/8 - 24 32 5/8 - 33 1/8
XXL 41 3/4 - 43 1/4 36 1/4 - 37 3/4 24 - 24 3/8 38 42 1/8 - 43 3/4 24 3/8 - 24 3/4 33 1/2 - 33 7/8
XXXL 44 7/8 - 46 1/2 39 1/4 - 41 24 3/4 - 25 1/4 40 43 3/4 - 45 1/4 25 1/4 - 25 5/8 34 1/4 - 34 5/8
XXXXL 46 1/2 - 48 41 - 42 1/2 25 5/8 - 26 42 45 1/4 - 46 7/8   26 - 26 3/8 35 - 35 3/8

 

How to measure

CHEST
Measure around the fullest part, under the armpits, keeping the tape horizontal.
WAIST
Measure around the natural waist, inline with the navel, keeping the tape horizintal.
ARM
Measure from shoulder (Humerus) to wrist
HIP
Measure around the fullest part of your hips, about 20cm below waist line, keeping the tape horizontal.
THIGH 
Measure around the thigh just below the crotch, keeping the tape horizontal.
INSEAM
Stand against a wall, ask someone else to measure from the crotch to the bottom of your leg

 

Shape

The most important helmet fitting aspect to consider before determining helmet size is helmet shape. The shape of the rider's head plays a crucial role in selecting a proper fitting motorcycle helmet. All helmet manufacturers design their lids to fit a specific head shape. These often range across three primary designations - long oval, intermediate oval, and round oval.

  • Long Oval - Shaped for a head which is longer front-to-back (from forehead to the back of the skull) than it is side-to-side (ear to ear).
  • Intermediate Oval - Shaped for a head which is slightly longer front-to-back than it is side-to-side. Most motorcycle helmets will fall into this category as it is the most common head shape; if a helmet does not state its shape, this is usually it.
  • Round Oval - Shaped for a head which has almost identical front-to-back and side-to-side measurements.

Once the head shape is determined, it is easier to filter the enormous selection of available motorcycle helmets down to a smaller, more appropriate list of those which will fit the rider's head. Now it is time to find the correct size of the motorcycle helmet.

Helmet Safety Standards

DOT Helmet Standard:  This stands for “Department of Transportation,” (not “doin’ our thang”) but the standard is FMVSS 218, the Federal Motor Vehicle Safety Standard #218, Motorcycle Helmets, and it is applicable to helmets sold in the U.S. for on-road use.

ECE 22.05 Helmet Standard:  ECE stands for “Economic Commission for Europe,” which was created under a United Nations agreement in 1958.  The 22.05 part refers to the specific regulation that the standards for testing are described in.

Snell (Snell Memorial Foundation M2010) Helmet Standard:  The Snell Memorial Foundation is a private, non-profit organization formed in 1957 dedicated to improving helmet safety. Snell goes beyond the governmental standard-setting approach and is available to assist manufacturers with helmet development by offering prototype testing.

What is MIPS technology? MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. MIPS has been developed by leading brain surgeons and scientists to reduce the rotational forces on the brain caused by angled impacts to the head.