2019 Troy Lee Designs TLD GP Air Premix 86 Navy MX Pants

  • Sale
  • Regular price $60.00
  • 1 available

See size chart
Need help with sizing?


Troy Lee Designs MX Pants


Have a Question?

Be the first to ask a question about this.

Ask a Question

Troylee Designs Gloves Sizing

* Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

S 7 17.78
M 8 20.32
L 9 22.86
XL 10 25.4
XXL 11 27.94


How to measure

Wrap a cloth measuring tape around your hand behind the knuckles, not including the thumb, keeping the tape snug. Measure both left and right hands and use the larger of the two measurements.

TroyLee Designs Men Jersey Sizing

* Sizing information is provided by the manufacturer and does not guarantee a perfect fit.








(IN) (CM) (IN) (CM) (IN) (CM)
S 21 53.3 28 71.1 33 83.8
M 22 55.9 29 73.7 35 88.9
L 23 58.4 30 76.2 37 94
XL 24 61 31 78.7 38 96.5
XXL 25.5 64.8 32 81.3 39 99.1
XXXL 26.5 67.3 33 83.8 39 99.1

How to measure

Measure across the broadest part of the front of your chest, at armpit level, keeping the measuring tape parallel to the ground.
While standing upright, measure the distance between your waist (typically at navel or top of the hip bone level) and the top of your shoulder, to the left or right of your spine.
Standing up straight with your arms at your sides, measure from the base of your neck at the center of your spine, along the top of your shoulder and down to your wrist bone, along the outside of the arm.

TroyLee Designs Men Pants Sizing










(IN) (CM) (IN) (CM) (IN) (CM) (IN) (CM)
XS 28 29-33 73.7-83.8 30.5 77.5 38.5 97.8 11 27.9
S 30 31-34 78.7-86.4 31 78.7 29.5 74.9 11.5 29.2
M 32 33-36 83.8-91.4 32 81.3 40 101.6 12 30.5
L 34 35-38 88.9-96.5 32.5 82.6 41 104.1 12.2 31
XL 36 37-40 94-101.6 33.5 85.1 41.5 105.4 12.5 31.8
XXL 38 39-42 99.1-106.7 34 86.4 42.5 108 13 33
XXXL 40 41-44 104.1-111.8 35 88.9 43.5 110.5 13.5 34.3
4XL 42 43-46 109.2-116.8 36 91.4 44 111.8 14 35.6
5XL 44 45-48 114.3-121.9 36 91.4 44 111.8 14.2 36.1


How to measure

Measure from the highest point of your crotch down to your ankle, along your inner leg.
Indicates the width of the front of the pants at the knee joint, with the pants laying on a flat surface.
Measure from from the top of your hip bone (typically inline with your navel) to the bottom of your ankle bone, along the outer side of your leg.
Measure around your natural waistline, around the top of the hip bones, inline with the navel while keeping the measuring tape parallel to the ground.


The most important helmet fitting aspect to consider before determining helmet size is helmet shape. The shape of the rider's head plays a crucial role in selecting a proper fitting motorcycle helmet. All helmet manufacturers design their lids to fit a specific head shape. These often range across three primary designations - long oval, intermediate oval, and round oval.

  • Long Oval - Shaped for a head which is longer front-to-back (from forehead to the back of the skull) than it is side-to-side (ear to ear).
  • Intermediate Oval - Shaped for a head which is slightly longer front-to-back than it is side-to-side. Most motorcycle helmets will fall into this category as it is the most common head shape; if a helmet does not state its shape, this is usually it.
  • Round Oval - Shaped for a head which has almost identical front-to-back and side-to-side measurements.

Once the head shape is determined, it is easier to filter the enormous selection of available motorcycle helmets down to a smaller, more appropriate list of those which will fit the rider's head. Now it is time to find the correct size of the motorcycle helmet.

Helmet Safety Standards

DOT Helmet Standard:  This stands for “Department of Transportation,” (not “doin’ our thang”) but the standard is FMVSS 218, the Federal Motor Vehicle Safety Standard #218, Motorcycle Helmets, and it is applicable to helmets sold in the U.S. for on-road use.

ECE 22.05 Helmet Standard:  ECE stands for “Economic Commission for Europe,” which was created under a United Nations agreement in 1958.  The 22.05 part refers to the specific regulation that the standards for testing are described in.

Snell (Snell Memorial Foundation M2010) Helmet Standard:  The Snell Memorial Foundation is a private, non-profit organization formed in 1957 dedicated to improving helmet safety. Snell goes beyond the governmental standard-setting approach and is available to assist manufacturers with helmet development by offering prototype testing.

What is MIPS technology? MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. MIPS has been developed by leading brain surgeons and scientists to reduce the rotational forces on the brain caused by angled impacts to the head.